Dynamic phase-change insulation for residential and commercial buildings. Works in both summer and winter. EPBD IV compliant. Reduces HVAC load by up to 45%.
Traditional insulation is passive and static. It resists heat flow, but does nothing to moderate temperature swings or absorb thermal peaks. When the sun hits a wall at 2 PM, conventional mineral wool or EPS simply slows down the inevitable — the building still heats up, the HVAC system still works overtime.
TI-SKIN® COMFORT introduces dynamic thermal mass. The phase-change material absorbs excess heat energy during the day (melting), stores it as latent energy, and releases it at night (solidifying). The building envelope becomes a temperature buffer — not just a barrier.
PCM absorbs solar heat gain during peak hours (melting phase), preventing interior temperature rise. As outdoor temperatures drop in evening, PCM releases stored heat outward — pre-cooling the envelope for the next day.
During daylight hours, PCM absorbs solar gain through south-facing walls. As nighttime temperatures fall, PCM releases stored heat inward — reducing heating system demand during coldest hours.
Peak demand flattening reduces peak cooling/heating requirements, enabling smaller, lower-cost HVAC system sizing
Delays peak indoor temperature by 6–8 hours — shifting peak demand from the hottest afternoon to cooler evening hours
Reduces building energy demand to levels compatible with PV solar supply — essential for NZEB classification under EPBD IV
Each square meter of COMFORT installed delivers equivalent CO₂ offset to planting one tree per year, calculated over a 30-year product lifecycle
Physical format (all models): 1.2 cm × 48 cm × 122 cm. Pallet: 150 m² / 750 kg. 20' container: 1,500 m². 40' container: 3,000 m².
The EU Energy Performance of Buildings Directive (EPBD IV), in force since 2024, mandates that all residential buildings achieve minimum energy performance class E by 2030 and class D by 2033. Approximately 55 million European buildings currently rated F or G must be upgraded.
TI-SKIN® COMFORT directly addresses this mandate: a 1.2 cm panel installation typically moves buildings up 1–2 energy classes, often converting F-rated buildings to D-rated without structural modifications. This makes it one of the highest-value compliance pathways per euro invested.
Market Size: The EU Building Renovation Wave represents €275+ billion in investment through 2030. TI-SKIN® COMFORT is positioned as a key enabling technology for deep renovations under Renovation Passports, with explicit support under the Social Climate Fund for social housing upgrades.
| Metric | TI-SKIN COMFORT | Heat Pump |
| Installation cost | €2,400–4,800 | €8,000–15,000 |
| Annual savings | €600–900 | €800–1,200 |
| Payback period | 4–6 years | 9–14 years |
| Maintenance | Zero | Annual service required |
| Lifespan | 30+ years | 15–20 years |
| Combination | COMFORT + heat pump = 60–70% total energy reduction | |
1.2 cm. No structural modification. No building permits in most EU jurisdictions. No maintenance. 30-year lifespan. TI-SKIN® COMFORT is the minimal-intervention maximum-impact solution for Europe's building renovation mandate.